Please note: There is a minimum order quantity of 2 for this product

For bulk purchase more than 10 units, please contact our sales team for the bulk discount 1300 686 666.

This product is currently not available for distribution in WA for standard promo shipping cost, please email us for pallet quotes or alternative products in WA.

Description

Maya stacking bar stool h.65 cm is produced with a single injection of polypropylene reinforced with glass fiber obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.? Available in Black, Dark Grey, Taupe and White.

Features

• 5 years warranty
• Stackable
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions (mm): 480L x 400W x 970H
• Seat Dimensions(mm): 650 Seat Height x 360 Seat Width x 400 Seat Depth x 360 Seat Back Height x 390 Seat Back Width
• Unit Weight: 5kg
• SWL: 135 kg
• Supplied assembled
• Weather resistant, UV Stabilised
• Stocked in: Black, Anthracite, Taupe, White
• Matching product to the Maya Chair
• Made in Europe
• Product Brochure

Please Note:Product Sizes, Weights & Colours may vary and are subject to change.

Test result

Tests Completed

1. Outdoor furniture – General safety requirements EN 581-1:2017
2. Seat and back static load test EN 1728:2012+AC:2013
3. Seat and back fatigue test EN 1728:2012+AC:2013
4. Leg forward static load test EN 1728:2012+AC:2013
5. Leg sideways static load test EN 1728:2012+AC:2013
6. Seat impact test EN 1728:2012+AC:2013
7. Foot rest static load test EN 1728:2012+AC:2013
8. Stability – EN 1022:2005

Seat & Back Static Load Test

Seat Front Edge Static Load Test

General Safety Requirements

• Edges of seat, back rest and arm rests rounded and chamfered
• All other parts: free from burrs, sharp edges and sharp points.

Tubular Components Safety Requirements

• Absence of tubular components with diameter > 7 mm and < 12 mm with a depth > 10 mm.
• Tubulars in contact with the floor are closed. Holes in them are allowed as long as they are < 7 mm or > 12 mm

Shear & Squeeze Points Safety Requirements

• Absence of shear and squeeze points, created by loads applied during normal use.